FritzBox and WRT54GS

[enni]

Good day,
I have a few problems with the settings of my router (WRT54G with firmware DD-WRT v24-sp1).
Located at the following facts:
1. FritzBox 7170 (IP. 192.168.178.1) -> modem / router that goes to the internet
2. WRT54GS (IP. 192.168.178.2) with FritzBox connected via WAN

Settings in the setup (DD-WRT):

Connection Type -> Static IP
WAN IP -> 192.168.178.2
Subnet Mask -> 255.255.255.0
Gateway and DNS1 -> 192.168.178.1
.
.
.
LAN IP -> 192.168.179.1

In wLan area I have 2 SSID:

1. Physical Interface -> Private network (WPA2)
2. Virtual Interface -> Hotspot (open)

I have taken over all the settings from here:
http://worldspot.net/wk/SpotInfo


But still I'm so into the Internet without the query and the same, where
is the error?

PS: When I have the DNS IP 192.168.178.1 tried, and 208.67.222.222 but nothing had geholen.


Deutsch:

Guten Tag,
ich hab ein paar probleme mit den Einstellungen meines Routers (WRT54GS mit der Firmware DD-WRT v24-sp1).
Folgender sachverhalt liegt an:
1. FritzBox 7170 (IP. 192.168.178.1) -> Modem/Router der ins Internet geht
2. WRT54GS (IP. 192.168.178.2) mit der FritzBox per WAN verbunden

Einstellungen im Setup (DD-WRT):

Connection Typ -> Static IP
WAN IP -> 192.168.178.2
Subnet Mask -> 255.255.255.0
Gateway und DNS1 -> 192.168.178.1
.
.
.
LAN IP -> 192.168.179.1

Im wLan bereich habe ich 2 SSID:

1. Physical Interface    -> Privates netzwerk (WPA2)
2. Virtuelles Interface  -> Hotspot (offen)

Ich habe alle Einstellungen von hier übernommen:
http://worldspot.net/wk/SpotInfo


Aber trotzdem komme ich so in Internet ohne Abfrage und der Gleichen, wo
liegt der Fehler ?

PS: Als DNS IP habe ich die 192.168.178.1 probiert und auch 208.67.222.222 aber nichts hatte geholen.

[WorldSpot]

Hi
I haven't tried v24 since a long time.
But I think that the hotspot must be on the first ssid.
You should also try one single ssid if this doesn't work.

A lot of people had problems making chillispot work with dd-wrt, some other don't, I don't know why.
A revert to v23sp2 worked for some of them (but there is no multi ssid feature)