Author Topic: Ubiquiti NanoStations Loco M2 & M5  (Read 2222 times)

Offline Gordon-waters

  • Jr. Member
  • **
  • Posts: 9
Ubiquiti NanoStations Loco M2 & M5
« on: November 28, 2018, 07:15:48 am »
HI,

I have a Nanostation Loco M2 & M5 both XW versions. I am unable to install any Worldspot firmware on them as I can not down ground the firmware to xw5.5.x. I can only get them to XW5.6.x

Will your Firmware be updated to run on these.



Thanks

Gordon

Offline WorldSpot

  • Administrator
  • Hero Member
  • *****
  • Posts: 2472
Re: Ubiquiti NanoStations Loco M2 & M5
« Reply #1 on: November 28, 2018, 08:49:47 am »
Hi

Ubiquiti updated firmware and hardware.
It seems that flashing these units is now difficult, if not impossible.

I found an openwrt topic discussion about this:
https://forum.openwrt.org/t/new-ubiquiti-loco-m2-xw/5760

Hope this helps

Offline Gordon-waters

  • Jr. Member
  • **
  • Posts: 9
Re: Ubiquiti NanoStations Loco M2 & M5
« Reply #2 on: November 28, 2018, 09:15:41 am »
Hi,

Thanks for the reply, Yes this confirms what I was seeing. So looks like I need to find a replacement to the Ubiquiti's

Gordon

 

anything