Author Topic: New TL-WR841N v10.0 and TL-WR941ND V6.0  (Read 1717 times)

Offline comptech1

  • Jr. Member
  • **
  • Posts: 1
New TL-WR841N v10.0 and TL-WR941ND V6.0
« on: October 12, 2015, 02:19:06 am »
Is the worldspot firmware compatible with these two routers as we cannot get the old routers anymore

Offline WorldSpot

  • Administrator
  • Hero Member
  • *****
  • Posts: 2453
Re: New TL-WR841N v10.0 and TL-WR941ND V6.0
« Reply #1 on: October 14, 2015, 09:18:14 am »
Worldspot firmware is not yet compatible with openwrt chaos calmer.
So it seems it is not compatible with these routers.
http://wiki.openwrt.org/toh/tp-link/tl-wr841nd
http://wiki.openwrt.org/toh/tp-link/tl-wr941nd

wr1043nd is recommended using latest firmware:
http://worldspot.net/wsbeta/barrier_breaker-r45841-4/

Offline scrampy

  • Jr. Member
  • **
  • Posts: 1
Re: New TL-WR841N v10.0 and TL-WR941ND V6.0
« Reply #2 on: August 31, 2017, 02:44:35 am »
Hi,

Sorry to post to an old thread, but has there been any update on this?  Are we now able to use any of the currently available TP-Link TL-WR841 routers?  I see that OpenWRT appears to support these now (https://wiki.openwrt.org/toh/tp-link/tl-wr841nd) but I don't know enough about either OpenWRT or Worldspot to figure this out.

Thanks!

Offline WorldSpot

  • Administrator
  • Hero Member
  • *****
  • Posts: 2453
Re: New TL-WR841N v10.0 and TL-WR941ND V6.0
« Reply #3 on: August 31, 2017, 05:11:44 pm »

 

anything