WR841ND node setup not working

[danirs]

hi Sirs,

i have a problem with a TP-Lnk WR841ND v7 and worldspot firmware
the node setup not working
i try to connect but it says "Trying to reach router" - Authentication error : urlerror : <urlopen error [Errno 110] Connection timed out>
the hotspost name is FreeHOT  and the node is HOT1

one more question, is possible to allow facebook site before the connection?

thanks daniele

[WorldSpot]

Hello

Did you read worldspot firmware instructions?
Do you get checkins?
Is it connected through the wan port?
Do you see a worldspot WiFi?

[danirs]

thanks for the fast reply!

Did you read worldspot firmware instructions? yes

Do you get checkins? i don't understand that, what does it mean?

Is it connected through the wan port? Yes.

Do you see a worldspot WiFi? Yes, the private and public wifi works good.

i did the configuration without problem, and the hotspot works.
i'm just not able to access to WorldSpot Firmware Realtime Dashboard

[WorldSpot]

OK, thanks for your response.

It is probable that your ISP is blocking some ports for the dashboard vpn to work.
It uses UDP on a specific port.

[danirs]

i don't think is a isp problem, because i have another hotspot in the same network lan that works good in the last 4 years.

should be a problem during the firmware flashing?

[WorldSpot]

I see that you use a very old firmware.
Please reflash from here:
http://dl.worldspot.net/wsbeta/14.07-20160229-1/

flash procedure:
http://www.worldspot.net/forum/index.php?topic=5772.msg24767#msg24767

[danirs]

ok thanks for your support, but how can i upgrade without dashboard access?

[WorldSpot]

Sorry, I forgot...

You need to connect through ssh (using putty for example).
But for this, you need to know the router ip address.
If you use a laptop, connect to the hotspot, then ssh to "10.1.0.1"
login is root
password is in your node's edit page.

dashboard commands should work the same in ssh.

[danirs]

I had a problem and i change the router.. now works good!!

last question, how can i give access at facebook page before hotspot connection? hope you understand me...

[WorldSpot]

in additional option in "Hotspots/Configure hotspot/Coova AP hotspots options",
For example, you can allow people to visit some allowed domains by setting the option:
HS_UAMDOMAINS=yourdomain.com,yourdomain2.com