Author Topic: Block - separate access to LAN and WAN  (Read 2834 times)

Offline tosiek

  • Jr. Member
  • **
  • Posts: 3
Block - separate access to LAN and WAN
« on: July 17, 2017, 07:32:09 pm »
I have 2 cases on DD-WRT with Chillispot.

1. There is a dedicated device with connected WAN to my LAN (192.168.1.X). How to block access to my LAN via  hotdspot WAN?

2. How to separate HotSpot Wifi Form access to  cable LAN? Is that possible with virtual WiFi (not nccessary but will be nice)? I can't find the working solution.

Offline WorldSpot

  • Administrator
  • Hero Member
  • *****
  • Posts: 2472
Re: Block - separate access to LAN and WAN
« Reply #1 on: July 17, 2017, 08:12:43 pm »
Ddwrt is not supported here sorry.
If you use worldspot firmware,  there is now a secured network that can't be accessed from the public network.
Lan ports can be easily configured from the openwrt administration interface.

Offline tosiek

  • Jr. Member
  • **
  • Posts: 3
Re: Block - separate access to LAN and WAN
« Reply #2 on: July 17, 2017, 08:40:47 pm »
OK. I will probably switch to LEDE (openwrt). Is there any tutorial for coovachilli secure?

Offline WorldSpot

  • Administrator
  • Hero Member
  • *****
  • Posts: 2472
Re: Block - separate access to LAN and WAN
« Reply #3 on: July 17, 2017, 08:45:05 pm »
Worldspot firmware is based on openwrt and has been tested on lede.

What is your exact router model?

Offline tosiek

  • Jr. Member
  • **
  • Posts: 3
Re: Block - separate access to LAN and WAN
« Reply #4 on: July 17, 2017, 08:45:59 pm »
Asus rt-ac56u for block access to wan and  Tp Link 1043nd to block access to LAN

Offline WorldSpot

  • Administrator
  • Hero Member
  • *****
  • Posts: 2472
Re: Block - separate access to LAN and WAN
« Reply #5 on: July 17, 2017, 08:55:41 pm »
Flash worldspot firmware full version. It will manage both networks. You will get full openwrt admin interface