Author Topic: PicoStation M2 hp  (Read 4544 times)

Offline egildo

  • Jr. Member
  • **
  • Posts: 2
PicoStation M2 hp
« on: March 10, 2013, 12:22:56 pm »
Picostation bricked after flashing whit the Worldspot firmware
(openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory)
i tried for 2 time and having the same results !!!
the original firmware is  XM-v5.5

suggestion??

Offline WorldSpot

  • Administrator
  • Hero Member
  • *****
  • Posts: 2472
Re: PicoStation M2 hp
« Reply #1 on: March 10, 2013, 01:51:29 pm »
Hi

Do you mean you don't get checkins?

A brick means a router you can't reflash. The ubiquiti routers have a builtin flashing bootloader.
You just have to reflash using the tftp method. (with worldspot firmware or original firmware)

Please read worldspot firmware instructions for this.

Best regards

Offline egildo

  • Jr. Member
  • **
  • Posts: 2
Re: PicoStation M2 hp
« Reply #2 on: March 10, 2013, 02:35:09 pm »
I have not explained.
flash firmware worldspot but does not work
remains lit green LED power and last up near to antenna.
then is not 'more' accessible.
no ping, arp no, nothing.

Ciao Egildo

Offline WorldSpot

  • Administrator
  • Hero Member
  • *****
  • Posts: 2472
Re: PicoStation M2 hp
« Reply #3 on: March 10, 2013, 02:38:00 pm »
This is normal behaviour. This router is not supposed to be accessed directly.
You ping to which address?
Have you read worldspot firmware instructions?:
http://www.worldspot.net/wk/en/WorldspotFirmware